The 2014-2018 Subaru Forester pairs its 2.5L and 2.0L turbocharged Boxer engines with all-wheel drive built for year-round use, and its cooling system has to manage heat from summer traffic to spirited back-road runs. The Mishimoto Performance Aluminum Radiator gives the Forester more cooling capacity for that duty, with a 55% increase in core volume and a 61% increase in external tube area over the factory radiator. Aluminum end tanks are TIG-welded to the core to handle pressure and heat cycling with no plastic tank to crack. An included 1.3 bar / 19 psi high-pressure Mishimoto radiator cap raises the boiling point of the cooling system for added margin under sustained load, and an included magnetic drain plug captures metallic debris and fragments circulating in the cooling system. The radiator can be installed without evacuating the AC system, and installation hardware is included. Direct fit for the 2014-2018 Subaru Forester 2.5L and 2.0L Turbo. No cutting, drilling, or modification required. Backed by the Mishimoto Lifetime Warranty.
- 55% more core volume than stock - the enlarged aluminum core gives the Forester's Boxer engine more cooling capacity than the factory radiator, holding temps steady through spirited drives and summer heat.
- 61% more external tube area - added tube surface in the airstream pulls heat out of the coolant faster than the factory radiator, limiting heat soak between hard pulls and in stop-and-go traffic.
- Installs without evacuating the AC system - the radiator swaps in with the AC system left charged, so no refrigerant recovery or recharge is added to the job.
- TIG-welded aluminum end tanks, no plastic to crack - aluminum tanks welded to the core take the heat cycling and pressure of hard driving, with no plastic tank to split as the radiator ages.
- Higher boiling point with the included 19 psi cap - the 1.3 bar Mishimoto high-pressure radiator cap raises system pressure, lifting the coolant's boiling point for more margin under sustained high load.
- Drops in without modification - confirmed direct fit for the 2014-2018 Subaru Forester 2.5L and 2.0L Turbo, with installation hardware included and no cutting, fabricating, or adapter work required.
- Magnetic drain plug included - the plug captures metallic debris and fragments circulating in the cooling system, so they are trapped and removed at the next coolant change.
- Own it for life - backed by Mishimoto's Lifetime Warranty, your investment is protected long after install day.
Attributes:
- Brand Name: Mishimoto
- GTIN: 00840197728345
- Core Finish: Uncoated
- Core Height: 13.4
- Core Length: 27.4
- Core Material: Aluminum
- Core Row Quantity: 2
- Core Thickness: 1.57
- Down Flow Or Cross Flow Type: Cross Flow
- Drain Plug Included: Yes
- Drain Plug Thread Size: M12 - 1.5
- Fluid Capacity: 1.15
- Inlet Diameter: 1.6
- Inlet Location: Top Left
- Install Difficulty: 3
- Outlet Diameter: 1.6
- Outlet Location: Bottom Right
- Overall Height: 19.2
- Overall Length: 28.3
- Overall Width: 3.6
- Radiator Cap Included: No
- SellingPoint01: 55% more core volume than stock - the enlarged aluminum core gives the Forester's Boxer engine more cooling capacity than the factory radiator, holding temps steady through spirited drives and summer heat.
- SellingPoint02: 61% more external tube area - added tube surface in the airstream pulls heat out of the coolant faster than the factory radiator, limiting heat soak between hard pulls and in stop-and-go traffic.
- SellingPoint03: Installs without evacuating the AC system - the radiator swaps in with the AC system left charged, so no refrigerant recovery or recharge is added to the job.
- SellingPoint04: TIG-welded aluminum end tanks, no plastic to crack - aluminum tanks welded to the core take the heat cycling and pressure of hard driving, with no plastic tank to split as the radiator ages.
- SellingPoint05: Higher boiling point with the included 19 psi cap - the 1.3 bar Mishimoto high-pressure radiator cap raises system pressure, lifting the coolant's boiling point for more margin under sustained high load.
- SellingPoint06: Drops in without modification - confirmed direct fit for the 2014-2018 Subaru Forester 2.5L and 2.0L Turbo, with installation hardware included and no cutting, fabricating, or adapter work required.
- SellingPoint07: Magnetic drain plug included - the plug captures metallic debris and fragments circulating in the cooling system, so they are trapped and removed at the next coolant change.
- SellingPoint08: Own it for life - backed by Mishimoto's Lifetime Warranty, your investment is protected long after install day.
- SellingPoint09: N/A
- SellingPoint10: N/A
- SellingPoint11: N/A
- SellingPoint12: N/A
- SellingPoint13: N/A
- SellingPoint14: N/A
- SellingPoint15: N/A
- TechSpec Applications: N/A
- TechSpec Chassis Codes: SJ
- TechSpec Core Height (in): 13.4
- TechSpec Core Length (in): 27.4
- TechSpec Core Thickness (in): 1.57
- TechSpec DPI: N/A
- TechSpec Drain Plug Thread Size: M12x1.5
- TechSpec Engine Codes: 2.5L FB25--2.0L FA20DIT
- TechSpec Fluid Capacity (gal): 1.15
- TechSpec Includes: (1) Mishimoto Performance Radiator--Mounting Hardware--Mishimoto Lifetime Warranty
- TechSpec Inlet (in): 1.6
- TechSpec Material: Aluminum
- TechSpec Note: N/A
- TechSpec Outlet (in): 1.6
- TechSpec Overall Height (in): 19.2
- TechSpec Overall Length (in): 28.3
- TechSpec Overall Width (in): 3.6
- TechSpec Rows: 2
- Transmission Oil Cooler Fitting Type: N/A
- Transmission Oil Cooler Included: No
Extended Information:
- Country of Origin: China
- Emissions : Emissions Compliance Exempt
Packing Information:
- Quantity of Each: 1
- Package UOM: EA
- Dimension: 30.9 x 7.2 x 22.2 inches
- Weight: 25 POUNDS